General Settings

Navigation:  Widget Designer > Devices > Camera Tracker >

General Settings

prev main next

Navigation:  Widget Designer > Devices > Camera Tracker >

General Settings

prev main next

Please wait. Due to its content this page might take a while to load...

This chapter explains the general settings from the Camera Tracker in Widget Designer.

wd_camera-tracker-general-settings-1
wd_camera-tracker-general-settings-3

Points
If you want to track more than 2 points (default setting) you may increase this value here to be able to track up to 99 points.

ID Start
The generated touch points may get an ID offset that you can set up here. This offset can be helpful for the source identification if you have several touch inputs in a multi-touch panel coming from different touch point sources within the Widget Designer or from several Widget Designer instances.

Cam / BW
When "Cam" is chosen the camera image will be displayed in the camera window above. This mode is helpful to set up the camera as well to choose a tracking color, see section Image Processing.
When "BW" is chosen the Image Processing and Point Tracker settings will be applied to the camera input, the result is shown in black and white.

Mute UI

Mutes the Camera Tracker UI and shows the last frame.