Device Tree

Navigation:  Pandoras Box > User Interface - Master > Tabs Overview >

Device Tree

prev main next

Navigation:  Pandoras Box > User Interface - Master > Tabs Overview >

Device Tree

prev main next

Please wait. Due to its content this page might take a while to load...

The Devices tab (or Device Tree) in Pandoras Box is the main place to browse and edit all available Sites and Devices (i.e. Layers) in the project.

The Device Tree...
- is always linked to the Sequence Tab in order to browse and edit keys stored to the sequence (both tabs cannot be closed!)
- allows a Site to be included in / excluded from the Preview (see below)
- allows you to sort and (un-)hide Sites, Layers, parameters and effects, see next chapter
- offers distinct columns for different information: parameter names, values and various (clickable) icons, see next chapter

In case you are rather interested in the devices itself, e.g what is the meaning of a parameter in a Video Layer, how to add an effect to a layer or how to use a DMX device (DMX fixture) please refer to the topic about "Devices and Layer Parameters".

If you are working with a single Pandoras Box system (i.e. in stand-alone mode), the "local" Site in the Device Tree lists all layers that are part of your system. You can add as many Output Layers as there are licenses available on your dongle(s).
If you are working with more systems (i.e. a Master-Client-setup) you need to add these Clients to the Device Tree, which automatically includes all necessary layers. To do this, there are two workflows.

Adding Connected Clients to the Device Tree

In case you like to add Clients which are already connected, please make sure that they are:
- started (in the same Version as the Master system) and showing the Pandoras Box Client window and
- set to the correct IP address and Pandoras Box domain.

click to enlarge

Since version 6.0.3, PB offers to add Clients to the Project automatically when starting a new project on your Master software. All existing Clients are visible in the dialog "Add Clients to Project". The list can be reloaded with the "Reload Clients" button. You can select or unselect individual Clients or all of them by pressing the according button. Press "Ok" to add all selected Clients to the Device Tree. The next chapter describes how to reorder the Sites.

assets_device-tree_drag-site

To manually add Clients, please go to the Assets tab which lists all connected PB systems. Drag them from there to the Devices tab. You can also multi-select them by holding the [Ctrl] key.

Adding Clients to the Device Tree for Pre-Programming

device-types_device-tree_drag-site

If your Clients are not connected yet, e.g. if you like to pre-program a show, you may drag an according system from the Device Types tab into the Device Tree. Simply open the "Pandoras Box" folder and choose the entry "Software license". A pop-up asks you, how many Outputs should be added to that system.

Later on, when the real systems are connected, you can simply select the pre-programmed Client and enter the IP address in the Device Inspector. A Client can manifest on that system if the number of Output Layers is less or the same as the number of available licenses on the dongle(s). If there are more Output Layers, PB offers to delete exceeding Output Layers automatically. You can of course also remove Output Layers manually in case you like to save or copy your programming (i.e. Containers on Output Layers) first.

device-tree_site-selected

After adding a system to the Devices tab, it is shown with collapsed layers. To unfold/fold a site double-click on it.
The right-click menu offers a rename command [F2] in case you like to work with more descriptive names.

preview_toggle-preview-on

Per default, a Site is not included in the Preview when added to the project. Note that its icon is not highlighted. To add a Site to the Preview rendering, right-click it to open the context menu and choose "Toggle Preview". Now, the icon is highlighted in blue.

See the following sites for more information:
Site, Layer and Parameter Structure
Changing Parameter Values (Device Tree)
Context Menus - Device Tree
Device Selection