Please wait. Due to its content this page might take a while to load...
The Fader Controller Board acts as extension for the Jog/Shuttle Controller. It allows controlling 6 more sequences.
In order to map the faders to sequences in Pandoras Box, please open the Configuration tab > Controller Setup.
SELECT (Button above fader):
Selects the sequence. The blue led on the button will light as indicator for the selection.
As soon as a sequence is selected, all Cue Buttons as well as the Jog Dial and the Playback Buttons are linked to this sequence!
LED light status:
Blue LED is on: Sequence is selected.
Red LED is blinking: Sequence status is "Play"
Red LED is on: Sequence status is "Pause"
Controls the sequence opacity.
Fader position on top = Opacity FULL
Fader position at bottom = Opacity 0%
PLAY/PAUSE (Button below fader):
Toggles the Sequence between Play and Pause. This Play/Pause Button can be used without having the sequence selected via the SELECT-Button.
As soon as a sequence is selected on the Fader Extension, the Cue Buttons, the Jog Dial and the Playback Buttons on the Jog/Shuttle Controller are assigned to this selected sequence.
See the Jog/Shuttle Controller for more information about Cue Buttons, Jog Dial and Playback Buttons.