Image Adjust - Crop |
|
Image Adjust - Crop |
|
Image Adjust - Crop |
|
Image Adjust - Crop |
|
Please wait. Due to its content this page might take a while to load...
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. The CCB Effect allows adjusting Color, Contrast and Brightness. The Chroma parameter multiplies each RGB value with a factor. The Contrast parameter multiplies bright colors with a factor to make them brighter and divides dark colors with a factor to darken them further. The Brightness parameter adds a value to each RGB value equally. Note, there is an alternative to this effect, the "CCB Multiply". There, the Brightness parameter works in the same way as the Chroma one.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Creates a lighting effect on the image, the colors for High, Mid and Low Lights can be adjusted separately.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Allows setting the overall level gradation.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Allows setting the gradation levels for all three channels, RGB.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Adds RGB colors by the RGB color mix value, allows inverting the image.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Allows setting minimum and maximum levels for all three channels, RGB.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. RGB CTB (color temperature blue) emulates the CTB filter that converts tungsten light of 3200K to 'daylight' color.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. RGB CTO (color temperature orange) emulates the CTO filter that converts 'daylight' color to tungsten light of 3200K.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Allows adjusting the gamma for all three channels, RGB. The default value of 255 for RGB equates to a gamma value of 1.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Allows setting minimum and maximum levels for all three channels, RGB.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. All RGB colors are multiplied by RGB color mix values. Multiply can be factorized and inverted.
|
Applies the effect within a rectangular area with hard borders; the rectangle's edges can be shifted in- or outwards independently. Squishes the RGB levels. For lower parameters this effect can be compared to the "Levels RGB" effect.
|
Show/Hide hidden text
