The Patch settings allow you to change the Patch View.
You may set a higher zoom factor to zoom into the patch (by default the zoom factor is set to 1).
Press [Center] to move the patch's center point into the center of the user interface. This can be helpful after dragging the patch.
[Patch Width & Height]:
hes size is displayed here.
When enabling this option, the DMX Addressing will be shown on the patch for each fixture.
In the left image you see two fixtures. Their DMX address is shown in the respective upper left corner.
The lower fixture is highlighted blue as it is currently selected.
A background image (for example a floor plan) may be displayed on the patch, this can be helpful for some patches.
To do so, load a background image (see Edit Menu) and enable the option [Show BG].
[Show Pixel Grid]:
Uncheck this option if you don't want to see the pixel grid in the patch.
Please note that with some patch sizes and zoom factors the pixel grid can't be displayed.