SMPTE Link

Navigation:  Hardware and Accessories >

SMPTE Link

prev main next

Navigation:  Hardware and Accessories >

SMPTE Link

prev main next

Please wait. Due to its content this page might take a while to load...

The Pandoras Box Master can send and receive LTC SMTPE via the USB SMPTE Link interface.

_img7276

To connect the SMPTE Link please refer to the Configuration tab, section SMPTE Time Code. Afterwards, the Sequence Inspector allows to set up the "Mode", "Offset" and "Stop Action".

The SMPTE Link Interface provides balanced signal transmission:

Pin1: ground
Pin2: signal
Pin3: signal

It does not matter which signal is +/ -.