Please wait. Due to its content this page might take a while to load...
Setup your GSM modem in this tool to be able to receive and send SMS via the Widget Designer.
GSM Modem Settings:
Choose the COM Port, Baud rate, Data Bits, Parity, Stop Bits and the Flow control. Enter the Pin for the GSM Modem and press [Connect].
To use a prepared Blacklist for filtering the incoming SMS for specific words, please check the option Blacklist Filter.
Send SMS To All:
Click on this Button to send a SMS message to all Phone numbers in the SMS List. The following pop-up window opens:
Additionally to all Phone numbers in the SMS list, the new SMS can be sent to any number entered in the text field next to Phone Number.
Enter the SMS text in the text box.
Create Incoming SMS Message:
Click on "Create Incoming SMS Message" to create a SMS message without polling it via the GSM Modem.
The following pop-up window opens:
Enter the phone number that should appear as faked SMS sender in the text field.
Use the text box to enter the SMS text.
Push [Add to SMS List] to add this entry to the SMS Inbox list.
If you want to discard this entry, just press [Close Window] without adding it.
Click this button to clear the SMS List.
Export Phone List:
Click this button to export all SMS sender's phone numbers to a text file.
Export SMS List:
Click this button to export all SMS (phone number and message text) to a text file.
Load Inbox to List:
Load all SMS from your SIM Card into the Inbox.