Please wait. Due to its content this page might take a while to load...
The open source protocol TUIO allows outputting the AirScan's multi touch data to other applications
This protocol is widely used around the world by many application developers and is a commonly known way to transmit the individual touches.
See a list of compatible software and operating system frameworks here:
To use the AirScan with TUIO, set up the TUIO host IP and Port here and press [Apply]. The TUIO transmitter needs to be enabled by ticking the check box [Enable].
To start sending the AirScan's touch data, open the AirScan Tool and check the option [TUIO] inside the Multi Point Mode section.