Video Settings

Navigation:  Widget Designer > Devices > Camera Tracker >

Video Settings

prev main next

Navigation:  Widget Designer > Devices > Camera Tracker >

Video Settings

prev main next

Please wait. Due to its content this page might take a while to load...

This chapter explains how to choose a hardware device or network stream for the Camera Tracker in Widget Designer.

wd_camera-tracker-video-processing

Device

Choose your DirectShow Camera Device, NDI- or RTSP stream from the drop-down list.

 

wd_camera-tracker-video-processing-example
wd_camera-tracker-video-processing-camera
Format

Select the format (resolution, frame rate, aspect ratio) in the drop-down list. Please note that the format is automatically set when using NDI- or RTSP streams.

 

URL

Enter an URL in case you chose "RTSP" from the Device list. This can be an address from a web cam within your local network for example or a link to a public stream.

wd_camera-tracker-video-settings-connect

 

Connect Camera

Connects to the active input. Press this button once the video input is selected.

 

OptiTrack

Tick the check box to communicate to the OptiTrack camera.